Product Description

The bearing V-roller makes for a clean and compact idler setup. With pre-installed 1/4″ ID ball bearings, the Bearing V-roller is ready to slide onto a 1/4″ shaft and start rolling! The contoured shape of the V-roller allows it to self-center when running on a tube or shaft with an outside diameter of 1/4″ up to 2″. The overall width of the bearing v-roller is 1.195″ so that it can be mounted on an aluminum standoff and installed inside the Actobotics® channel. To hold the bearings away from the inside wall of the channel, a 1/4″ plastic spacer should be installed on each side of the V-roller.

Product Features

• • 1/2″ OD x 1/4″ ID bearings • Weight: 0.65 oz (each)
• • Use with aluminum, carbon fiber, or steel tubing. Works great with PVC too!
• • For mounting inside, we suggest using a 6-32 tapped standoff and 1/4″ plastic spacers (shown above).
• • 1/4″ shafting slides easily into this V-roller.
• • Designed to fit perfectly inside our aluminum channel.